13
12
USE OF THE WIRELESS MICROPHONE:
Use the switch(10) to turn on the transmitting microphone.
This switch has 3 positions:
OFF: microphone off
STANDBY: signal on, but microphone capsule disabled
ON: microphone completely ON
To adjust the wireless microphone’s volume level go to its menu and
adjust the level through the side button
The average transmission range is 50 m. This range can be affected by
sorrounding conditions.
If you bought model BM 661-2RM you will have at your disposal 2
wireless transmitters that can be used simultaneously.
These wireless microphones can operate on 16 channels. If there are
interferences on a frequency or if you use more than one microphone of
the same model, you can change operating frequency. The procession
pole and the wireless microphone must always be set on the same
frequency. To do that put the switches (12-13) of the pole and of the
microphones (see picture) in the same position.
If you are using two microphones remember to match the switches with
red label on the pole with red microphone and those with blue label on
the pole with blue microphone.
When you turn on the wireless microphone the led will light on for an
instant as a test. If the led lights on during operation it means that
batteries are down and need to be replaced
