manualshive.com logo in svg

Karma BLAZER, Manual, Page: 76 / 84

Share
Download
Karma BLAZER Manual Download Page 76

76 

 

21.  Refurbishment and re-use of the product. 

 

This wheelchair is suitable for refurbishment and re-use. This means that, if 
the wheelchair is not used anymore by the first user, it can be refurbished to fit 
another user. Should you not be able to use the wheelchair any longer, we 
strongly recommend you contact your local authorized supplier to have it 
picked up for refurbishment and re-use. 
 
 
 

 

 

 

 

 

 

 

 

22.  Disposal of the product 

 

In the case of disposal of the used wheelchair you need to follow the local 
legal regulations for disposals. 

 

We strongly recommend you contact your local authorized supplier to take 
care of the disposal of your wheelchair. 
 
 
 

 

 

 

Batteries  are  classified  as  chemical  waste  and  need  to  be  disposed 
according to the local regulations for chemical waste. 

The refurbishment of the wheelchair is only allowed to be executed by an 
authorized supplier. 

If the wheelchair is refurbished by a non-authorized supplier or institute, 
Karma Medical cannot be held responsible for this product, and all 
warranty claims will be voided. 

The wheelchair will be refurbished according to a refurbishment guideline 
of Karma. This includes the replacement of all upholstery parts, a total 
disinfection of the product and a complete technical check of the 
wheelchair and its accessories.  

Summary of Contents for BLAZER





















































































Reviews:

No comments