Karlu Photographic KarLite KARSB60 Assembly Instructions Download Page 3

When you have done this place the rod holders in their normal positions (see figure 3 if you are not sure). 

 
 
 
 
Your softbox will now look more like a softbox and should be rigid (see 
figure 7) below with the four rods connected to the speedring and the 
corners of the softbox and each passing over a Velcro strip (this Velcro 
strip is used to help fix the inner diffuser panel). 
 
 
 
 
 
 
 
 
 
 

Place the inner diffuser panel inside the softbox (see figure 8) and then fix each velcro strip on the inner diffuser panel 
to the Velcro strips on the softbox itself (see figure 9). This should leave you with the inner diffuser panel fitted and 
taught inside the softbox (see figure 10). 

With the inner diffuser cover fitted now simply place the outer diffuser cover over the front of the softbox (it helps to 
line the corners up) and using the Velcro strips on both the outer diffuser cover and black outer softbox cover fix in 
place (see figure 11). 
 

 

 

Reviews: