Instructions for use SOM 62/32/22 LED
7 SOM 62/32/22 LED EN 2017-03
5.1.3
Deliverables for SOM 22 LED
The device is delivered as three individual sub-assemblies:
Wall bracket
Swivel and floating arms with electrical supply and lighting
Microscope head including attachment
Operating instructions
Fasteners for all components are included.
5.2
Transportation/packaging/unpacking/checking
The device is delivered as separate assemblies as described above, and installed and tested for
correct function by the specialist retailer or support personnel.
Check the packaging for damage before unpacking the device. If the packaging is
damaged, the contents may be as well. If the packaging is visibly damaged, please notify
the carrier immediately.
5.2.1
Unpacking
All packaging and filler material must be disposed of in line with applicable local regulations.
After unpacking all of the components, use the delivery note to check the delivery is
complete. If it is not, notify the supplier immediately.
6
Intended use
The product is intended for general-purpose operative and diagnostic medical deployment. It is
used for optimum illumination and magnification of the treatment area. The product may only be
used by trained specialists for the medical application described in this instruction manual.
Training is held by the manufacturer or by personnel authorised by the manufacturer. Intended
use does not include contact with the patient. The device may only be used in interior rooms
having sufficient levels of illumination and cleanliness.
