Karinear KNC-PF302SX Installation And User Instructions Manual Download Page 12

2.4-Wire Power Cord Installation

IMPORTANT: 

                            Use the 4-wire cable from power supply where local codes do not permit connecting the
frame-ground conductor to the neutral (white) junction box wire.

1.  Disconnect power

2.  Remove junction box cover if present.

3.  Connect the flexible cable conduit (3) from the 
     cooktop to the junction box (4) using a UL listed 
     or CSA approved conduit connector (7).

4.  Tighten screws on conduit connector, if present.

5.  Connect the two black wires (1) together using 
     the UL listed wire nut (5).

6.  Connect the two red wires (2) together using 
     the UL listed wire nut.

7.  Connect the green wire (6) from the cooktop 
     cable to the green wire (6) (in the junction box) 
     using the UL listed wire nut.
8.  Put a UL listed wire nut on the end of the white wire (8).

NOTE: 

Do not connect the bare ground wire to the neutral (white) wire in the junction box.

9.  Install junction box cover.

10.  Reconnect power.

1

2

3

4

5

6

7

8

 

OPERATING YOUR APPLIANCE

OPERATING YOUR COOKTOP

Any burner can be turned on by pushing  the  control  knob  down  and  turning  it  clockwise  or  counter- 
clockwise to the desired setting. To adjust the setting, turn the knob without pressing down. The burner is 
turned off by turning the control knob clockwise or counter-clockwise to "OFF".

OPERATING INDICATORS

When the burner is turned on, the corresponding operating indicator will light up regardless of the setting.

WARNING

Do not touch or lay any heat-sensitive objects on the cooktop while the operating 
                        indicator is still on. Danger of burns and fire hazard!

COOKWARE SELECTION

Pots and pans

Special cookware is not required, but as is true  with  all  types of  cooking   appliances,  the  better  the 
cookware, the better the performance.
Following these tips will allow you to make the most of your ceramic cooktop.

For the most even and energy- efficient cooking, the diameter of the pots should match the diameter 
of the burners as closely as possible.

 Use cookware with thick, flat, smooth bottoms. Slightly concave bottoms will also work adequately.

Pans with convex bottoms will not cook well.

12

Summary of Contents for KNC-PF302SX














Reviews: