1.Please ensure that there is enough space under the table for ventilation, otherwise the bottom of
the induction hob may overheat.
2.Please ensure that there are no other large appliances at least 2 inches below the product.
3.If the hob is installed above an oven, please keep the power cord from contacting the oven.
NOTE: The countertop of radius the corners of the cutout (1/4" radius is typical)
Installing the Cooktop
There are four mounting brackets supplied with the electric cooktop. These brackets
are designed to hold the cooktop firmly in place. The cooktop should be bedded to the
countertop using a soft bedding compound that will prevent damage if later removal for
service is necessary. We recommend a very small bead of silicone sealant.
Position the cooktop in the cutout opening and press firmly on all sides to seal the
frame into the bedding compound. Secure the mounting brackets to the cooktop from
underneath with the screws that are supplied as shown below.
