For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 6
Installation Instructions
–
4A98L
Step 1
–
Remove Load Plates
•
If installed, remove load plates on the
drivers side, at the end of each bow.
•
Repeat on both front and rear bows.
Step 2
–
Install Latch Assembly
•
At the open end of the rear bow, mount latch
assembly in the squares shown.
•
Use the 2nd set of square holes from the end of the
bow.
•
Mount using
two 5/16” x 1” carriage bolts, two 5/16”
flat washers and two 5/16” nyloc nuts.
