For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 6
Instructions
–
4A81L
Step 2
–
Mount Side Tube
•
Place a generous amount of sealant
into the tube connection.
•
Place side tube on top of installed
bows.
•
Have the bend towards the front of
the vehicle as shown.
•
Mount rotation bar plate to the rear
of the tube as shown.
•
Leave one square slot open at the rear.
•
Bolt together using 5/16” x 2” carriage bolt, a 5/16” flat washer and a 5/16” nyloc.
•
Snug Tighten, but allow movement.
