3
Step 3
Use the protector tape included in the bolt kit on the Support Tube just below the extension pan to prevent paint from
scratching. Attach the stiffener connecting bracket to 5/16” stud in desired location and the stiffener. Secure the
bracket with flat washer (a) and nyloc nut (b).
Step 4
Detach the Ladder Hook and Ladder Stop on the original pan, and install onto the new extension kit as shown. Attach
ladder hook to ladder pans on 5/16” studs in desired location. Attach ladder stop to coincide with ladder hook by using
3/8”‐16 x 1” Hex bolt(e), 3/8” flat washers(c), 3/8” nyloc nut(d) and placing stop so the tab on the stop goes into the
corresponding hole and slot.
(b)
Stiffener
Connecting
Bracket
(a)
Protector Tape
Protector Tape
Rear of Vehicle
Front of Vehicle
The installation is complete.
