For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 7
Install Instructions
–
4064M
Step 5
–
Install Partition
•
Place partition back into van.
•
Set on top of 1/4” carriage bolts (3)
protruding through the floor mount brackets
(D&E)
•
Align and bolt both sides of partition with
previously installed wings using 1/4"-20 x
.625” flanged HH (12) and a 1/4”
-20 flanged
nyloc nut (7). Similar to Step 1.
•
Repeat for all slots on both wings for a total
of 8x.
•
Bolt the bottom of the
parititon to the carriage bolts
using
1/4”
-20 flanged nyloc
nuts (7). Repeat for a total of
4x.
•
Snug Tighten, but allow
movement.
Step 6
–
Install Top Wing
•
Install top wing onto the top of the partition.
•
The panel will extend towards the rear of the van.
•
Bolt top wing (A) to partition using 1/4"-
20 x .625” flanged HH (12) and 1/4”
-20 flanged nyloc
nuts (7). Repeat for a total of 6x.
