Instructions – 40291
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Page 4
Step 3 – Mount Binder/Bin Holder to Shelf
At each location marked on shelf or other mounting location,
drill through surface using a 9/32” drill bit.
Using four 1/4” x 1” Phillips head screws, eight 1/4” flat
washers, and four 1/4” lock nuts, LOOSELY bolt through the
binder/bin holder and shelf.
DO NOT TIGHTEN hardware yet.
Step 4 – Mount Binder Holder to Floor
If a gap exists between the binder/bin holder and the
installation location in the floor, nylon spacers are
provided to fill the gap.
Press assembly firmly against the floor.
Using 1/4” x 1-1/4” hex head bolts, 1/4” lock
washers, 1/4” flat washers, and, if necessary, nylon
spacers, bolt through the base of the assembly into
the plus nuts.
Tighten hardware.
GO BACK AND TIGHTEN ALL HARDWARE.
INSTALLATION IS COMPLETE.
SPACERS AS
NEEDED
