For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 9
Install Instructions
Installation in RAM Promaster
Step 1
Bolt rear bracket to main assembly through the rear holes as shown.
Use two 1/4" x 7/8" hex bolt, two 1/4" lock washers and two 1/4"
flat washers.
*SNUG TIGHTEN
Step 2
Bolt the front bracket to the front of the
main assembly using two 1/4" x 7/8" hex
bolt, four 1/4" flat washers and two 1/4"
nyloc nuts.
*SNUG TIGHTEN
** We recommend having bracket all the way
towards the bottom of the slots.
Step 3
Place main assembly with mounting brackets into van.
Put in between seats. In the bottom bracket, mark the
four slots onto the floor of the van. In the front bracket,
Mark slot onto floor.
Remove main assembly from van.
Step 4
Check under the mat where previous slots were marked.
Be sure to have slots located in a way that it does not
interfere with anything important.
Step 5
Remove rear support bracket from main assembly.
Return to van, Place rear support bracket where you
previously marked.
Secure to floor using four 5/16" x 1.25" self tapping screws.
