Karel ST26, Technical Reference And User'S Manual

Page: 28 / 45

20
In the event that the number is correct, the message “Successful” is displayed for 1
second, OK tone is received and the Key Settings is completed.
After the acceptance of the extension number, there is no message given to the user if
the entered number has been programmed on another key before, the latest
programmed key will be valid.
An extension number can be assigned to a single key only. After the programming
mode is exited and those keys are pressed, the extension that has been stored on the
key is directly called. In addition to the calling function, status of the extension, which
has been programmed as the first function of the programmable keys can be viewed by
the LED next to it, as described below.
Extension Status Red LED
On Hook Off
Busy Continuously On
Ringing Blinking
Line
It enables the user to program a specific line number on a key. By pressing that key,
the user can access the line that has been programmed on the key and make a call
(provided that it is vacant) and the user can access that number by a single key. In
order to do that, one proceeds to the extension programming menu.
¨
Press Key: The key, on which the programming will be done, is pressed for a
short or a long period in order to select the first or the second function,
respectively.
¨
No: If a determined line number is entered and confirmed, then that line number
will have been assigned to that key. The number could be of at most 8 digits.
A line access code can be assigned to a single key only. After the programming mode
has been exited, upon pressing those keys, it is possible to access the programmed
line, without pressing
9 . While a line that has been assigned to a programmable key
has already been accessed, if that key is pressed, then the line is parked. The line is
retrieved upon pressing the key again.
LEDs are displayed in double colours. For the first function of the key, the LED blinks in
red, for the second function of the key the LED blinks in green.
Status of the line, which has been programmed as the first function of the key can be
viewed by the LED next to it, as described below.
Line Status Red LED
Available Off
Busy Continuously On
Call request is being received Blinking
Parked Blinking fast
Out of Service Off