Karel PG100-CU, Technical Reference And User'S Manual, Page: 3 / 9

TECHNICAL REFERENCE AND USER’S GUIDE REVAAA
INTERNAL PAGER SYSTEM CONTROL UNIT
II
PREFACE
Chapters in this guide have been prepared in order to present detailed technical
information to people who need hardware-based information about the PG100-CU
Internal Pager System Control, and instructing them for installation of the PG100-RF.
By this way, one could understand abilities of the device, how it will be operated in
accordance with customer demands and things that should be done in order to operate
it with full performance.
The first chapter - “Technical Introduction" It contains, technical information about
hardware and software structures of the device. Information in this chapter for which
knowledge in mechanics, electricity and electronics may be prerequisite, aims to
introduce structure of the device. Presentation of the information in this chapter follows
a path from the whole of the device down to the details of parts.
The second chapter - “Installation” - This chapter tells about the installation methods of
the device. This chapter definitely must be read before the installation by the personnel
who will perform the installation of the device.
The thind chapter - “Use” - This chapter explains the things to be done in order to put
the device in use.
Best regards,
Karel.
III
CONTENTS
TECHNICAL INTRODUCTION: .............................................................................................. 1
INTRODUCTION TO THE PG100-CU UNIT: ............................................................ 1
PARTS LIST ON DELIVERY: ..................................................................................... 2
COMPATIBILITY: .................................................................................................. 2
TECHNICAL SPECIFICATIONS: .................................................................................. 2
INSTALLATION: ............................................................................................................... 3
PREPARATION: .................................................................................................. 3
APPLICATION: ................................................................................................. 3
WIRING OF THE PG100-CU UNIT: ............................................................................. 4
Power Connection: ................................................................................................. 4
PG100-RF Connection:..................................... ...................................................... 4
Exchange Connection: ............................................................................................. 5
USE: ............................................................................................................... 6