OP50 Technical Reference and User Guide
23
A line access code can be assigned to a single key only. After the programming mode has
been exited, upon pressing those keys, it is possible to access the programmed line,
without pressing
9
. While a line that has been assigned to a programmable key has
already been accessed, if that key is pressed, then the line is parked. The line is retrieved
upon pressing the key again. Status of the line, which has been programmed as the first
function of the key can be viewed by the LED next to it, as described below.
Line Status
LED Status
Vacant
Off
Busy
Continuously On
Call request is being received
Blinking
Parked
Blinking fast
Private Pool
You can program 9 line numbers for FT15, which you call most frequently on the private
pool of your telephone. You could shorten duration of calling action by programming the
memory numbers on the keys. On the other hand, it can be used for OP50 for two kinds of
programming. The first of them is a kind of memory storage, in which 01-09 entries can be
stored and determined numbers are entered by the “no=” option. In the second of them,
the entire programming codes out of the service options that have been specified in the
user’s guide can be assigned to the programmable keys by entering the Feature codes.
♦
Press Key:
The key, on which the programming will be done, is pressed for a short or
a long period in order to select the first or the second function, respectively.
♦
Register no:
Afterwards, the “Register no=” menu is displayed. In this menu, the
display cursor enables data entry. As soon as the user enters the second digit of the
number s/he has started to enter (01-09), OP50 automatically confirms the number
and checks whether the memory number that has already been entered has
previously been assigned to any key (this system is like the one in the extension
programming.)
♦
No:
The desired line number or access code is entered. In order to assign the service
codes, on the other hand, first of all one of the codes that are mentioned in the user’s
guide of the exchange is dialed after pressing the “*” key and then it is confirmed. By
this way the service code is assigned to the key.
Common Pool
Line numbers that have been stored in the common pool memory fields with number 00-99
by the operator can easily be assigned to the programmable keys.
♦
Press Key:
The key, on which the programming will be done, is pressed for a short or
a long period in order to select the first or the second function, respectively.
