Memory Keys
How To Program Memory Keys
The
Memory Keys
are not preset and can be
programmed to any of the following:
-
Extensions,
-
Lines,
-
Common Pool numbers,
-
Private Pool numbers,
-
Some system features,
-
Function codes (of at most 8 digits).
You may program the
Memory Keys
as follows:
1. In the
Setting Mode, e
nter the
Phone Settings
menu, and then the
Key Settings
sub-menu.
2. Select the option that you require from the
options listed above.
3. Press the
Memory Key
that you wish to
program.
4. Proceed as indicated by the LCD messages.
If you wish, you may use the
Auto Settings
option in
the
Key Settings
sub-menu to program all of the
Memory Keys
at the same time. Refer to pg 9 for
details.
Following are the main points to program the
Memory Keys
:
•
Each
Memory Key
may be programmed for two
different functions:
Primary
Function
and
Secondary Function
. While programming a
Memory Key
, if a feature is to be assigned
to its
Primary Function,
the key should be pressed
until
the first
“beep” (the LED lights up green). If a
feature is to be assigned to its
Secondary
Function,
then the key should be pressed until the
second
“beep” (the LED lights up red).
•
To program the
Memory Keys
for certain system
features, you are required to select the feature
among the alternatives as indicated by the LCD
messages. The features and their LED status are
listed below:
Feature
LED Status (Red)
Follow Me
ON: Active.
Call Back
ON: Active.
