Karel DSS80 Easy To Use Owner’s Guide
Edition 3.2
17
AUTO SETTING OPTIONS FOR MS224 SYSTEMS
1. Option 1 (Code = 1)
The primary functions of all
keys are dedicated to the first
80 extensions.
2. Option 2 (Code = 2)
The primary functions of all
keys are dedicated to the
second 80 extensions.
3. Option 3 (Code = 3)
The primary functions of the
keys in-between 1 and 60 are
dedicated to the extensions in
between 1271 and 1330 and
the last 20 keys are dedicated to
the first 20 lines.
4. Option 4 (Code = 4)
The primary functions of the keys
in-between 1 and 60 are
dedicated to the first 60
extensions and the last 20 keys
are dedicated to 20 lines.
5. Option 5 (Code = 0)
All keys are set to be empty.
NOTES
1. In all of the assembled programming options, the
Secondary Functions
of the
keys are set to be empty.
2. If any of the ports that are assigned to DSS80 keys does not exist in the current
system capacity, then error tone is received if these ports are tried to be
accessed by pressing the relevant key of the DSS80 module.
E.g. If the system capacity is 12/36 and the key of 40
th
extension is pressed,
error tone is received.
3. A few minutes after the assembled programming, a “beep” is heard and the
LED of the key that is assigned to the DSS80 user blinks for a few seconds.
4. The numbering of DSS80 keys, that have been referred to in pages 16 & 17,
starts from the top left of DSS80 and goes down column by column. E.g. The
key with the indicator “
S
” is the 11
th
key.