Kärcher WD 2.2 series, User Manual

Page: 7 / 14

English
7
몇
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
Illustration
 Remove the appliance head and take
accessories out of the container.
Illustration
 Turn the container, press in the swivel
casters in the openings at the base of
the container till the end-point.
Illustration
 Put the appliance head onto the con-
tainer and lock it.
Illustration
 Connect accessories.
Illustration

Connect the mains plug and turn on the
appliance.
몇
Work only with a dry cartridge filter!
 Caution : Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
 Vacuum cleaning of hard surfaces:
Illustration
Insert the hard surface inlay into the floor
nozzle. The bristles should point towards
the front.
 Vacuum cleaning of carpets:
Illustration
Work without the hard surface insert.

Use the hard-surface insert when wet
vacuuming.
몇
Caution
Immediately switch the appliance off or pull
the power plug if foam forms or liquids es-
cape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er
.
Illustration
 Turn off the appliance and disconnect
the mains plug.
Illustration
 Remove the appliance head and empty
the reservoir.
Illustration
 Stow away the mains cable and acces-
sory at the machine. Store the appli-
ance in a dry room.

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorized customer service.
몇
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
 If required, rinse the container and ac-
cessories with water properly and dry
them before reuse.
Illustration
 Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it
dry completely prior to installation.
Commissioning and opera-
tion
Attaching the Accessories
Dry vacuum cleaning
Wet vacuum cleaning
Finish operation
Empty the container
Storing the appliance
Maintenance and care