Kärcher WBS 3, Manual

Page: 14 / 172

14 English
Storing the device
1. Place the device on a level surface.
2. Store the device within the permissible temperature range
(see Chapter Technical data).
Care and service
Emptying the device
ATTENTION
Water remaining in the device
Device damage due to rust and corrosion.
Empty the device completely after each use.
1. Take the device out of operation (see chapter Ending op-
eration).
Replacing the batteries
1. Remove the batteries from the device.
2. Insert new batteries (see chapter Insert batteries).
Troubleshooting guide
Rotating spray jet does not work
Batteries empty/defective
 Insert new batteries (see chapter Insert batteries).
 Check the battery condition.
Warranty
The warranty conditions issued by our relevant sales compa-
ny apply in all countries. We shall remedy possible malfunc-
tions on your appliance within the warranty period free of cost,
provided that a material or manufacturing defect is the cause.
In a warranty case, please contact your dealer (with the pur-
chase receipt) or the next authorised customer service site.
(See overleaf for the address)
Technical data
Subject to technical modifications.
Device performance data
Nominal voltage V 3
Feed pressure (max.) bar 10
Speed 1/min 600 - 1100
Operation duration with fully loaded
battery min 60
Ambient temperature °C 0 - 35
Electrical connection/Battery
Battery type 2 x 1,5 V AA
Recommended battery capacity Ah 2
Dimensions and weights
Length mm 215
Width mm 70
Height mm 180
Weight (ready for operation with
batteries) kg 0,45
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value m/s
2
0,1
Sound pressure level L
pA
dB(A) 54
Sound power level L
wA
dB(A) 68