English
7
Illustrations on fold-out
pages!
1 Power cord with plug
2 Push button take-up cable
3 On/Off button
4 Suction control
5 Suction hose
6 Handle
7 Teleskopic suction pipe
8 Adjustable teleskopic suction pipe
9 Floor nozzle
10 Cover attachment housing
11 Attachment housing QuickClick:
includes upholstery nozzle, telescopic
gap nozzle and a furniture brush
12 Change filter indicator
13 Shutter lever, lid filter bag/ motor pro-
tection filter
14 Motor protection filter
15 Filter bag holder
16 Cover EPA filter
17 EPA-filter
18 Carrying handle
Illustration
Lock the suction hose neck in the suc-
tion opening.
To take off, push both lock devices to-
gether and pull the tube.
Illustration
Connect handle and suction tube and
insert.
Connect the floor nozzle and telescopic
suction pipe and insert.
Illustration
Use the adjustment in order to adjust
the telescopic suction pipe to the length
you wish.
Illustration
When you stop or you take a short
break, hang the floor nozzle into the
parking position on the back of the ap-
pliance, and push it into the resting po-
sition.
Illustration
To remove, press handle backwards in
the direction of the appliance. The floor
nozzle is thus unlocked from the parking
holder and can be removed upwards.
Illustration
Hold the power cord at the plug and pull
it out. Insert the mains plug into a socket.
Turn on/off the appliance.
Illustration
The power suction adjustment is at the
power suction control:
- Marking MAX, high power suction
- Marking MIN, low power suction
Note
: the marking shows the current
suction power.
Adjust the suction power to suit the suc-
tion requirement
:
Low suction power
– for laced cur-
tains, textiles, upholstered furniture,
cushions
Medium suction power
– for slightly
dirty carpets/ carpeted floors, precious
carpets, bridges and runners
Highest suction power
– for hard
floors, very dirty carpets and carpeted
floors
Please take notice!
Should, while turning
the appliance on, the mains furse tripper
shut off, possibly, other electrical applianc-
es are connected and are operating on the
same electric circuit. Should this be the
case, put the appliance in its lowest power
stage, before turning the appliance on. Af-
terwards you may select a higher power
stage. Refer to chapter "Technical data" for
power fuse protection.
Important notice!
The appliance will shut-
down automatically, if there is danger of
overheating. Turn the appliance off and pull
the power plug. Make sure, that the nozzle,
the suction pipe or the tube is not clogged,
failing all the above the filter must be
changed. After the elimination of the inter-
ference let the appliance cool down for a
minimum of 1 hour, before using it again.
Operation
Description of the Appliance
Start up
