Kärcher VC 4i Cordless, Operator'S Manual

Page: 14 / 44

14 English
6. Empty the dust container, and rub
down inside it using a cloth.
Cleaning / replacing the brush
roller
1. Remove the brush roller using a coin
or a straight screwdriver.
2. Clean / replace the brush roller.
3. Insert the cleaned or new brush roll-
er into the floor nozzle, and fix the
brush roller into the place.
Ensure that the brush roller sits proper-
ly.
Troubleshooting guide
Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or in the case of malfunctions not men-
tioned here, please contact your autho-
rized Customer Service.
a.
b.
Fault Possible cause Remedy
Suction capacity
decreases. / Ab-
normal sound or
operating noise
which becomes
louder. Dust container is full.
Filter is clogged. 1 Check the dust container.
2 Empty and clean the dust
container and filter.
3 Check and clean the cyclone
cover.
The appliance
does not run. Battery is nearly empty. 1 Charge the battery.
The appliance is in danger of
overheating. 1 Check whether the dust con-
tainer is clogged.
2 Clean the dust container.
3 Switch the appliance on
again.
The floor nozzle
is shut down au-
tomatically. It is in danger of overheating. 1 Check whether the brush roll-
er is blocked, and clean the
brush roller.
2 Switch on the appliance
again.