![background image](http://html1.mh-extra.com/html/karcher/t-racer-t-400/t-racer-t-400_manual_655104008.webp)
– 2
Note
: Always use Kärcher water filter (or-
der no. 4.730-059.0) during suction opera-
tions of the high-pressure cleaner.
Fasten the T-Racer to the high-pressure
gun using the extension pipes.
Illustration
1 Screw the two extension pipes togeth-
er.
2 Press the extension pipe into the bayo-
net catch of the T-Racer.
3 Turn it by 90° until it locks into place.
4 Tighten the safety cover.
Illustration
1 Press the extension pipe into the bayo-
net catch of the high pressure gun.
2 Turn it by 90° until it locks into place.
3 Tighten the safety cover.
Adjust the turning handle "power" as
per the surface to be cleaned
Caution
Outdoor surfaces should be swept be-
fore the T-Racer is used to avoid dam-
aging the high-pressure nozzles.
Prior to use on sensitive surfaces (e.g.
wooden surfaces), test the product on
an imperceptible spot, in order to
promptly detect any changes in the sur-
face.
The T-Racer is not suited for scouring
or scrubbing!
Illustration
Do not run over protruding corners!
Fasten the T-Racer directly to the high-
pressure gun.
Press the bayonet connection of the T-
Racer into the connection of the high-
pressure gun, then turn by 90° until it
locks into place.
Tighten the safety cover.
Illustration
Caution
Always hold the T-Racer at the handle
while cleaning the walls.
Adjust the turning handle "power" as
per the surface to be cleaned
The turning handle "power" is used to
change the distance of the high-pressure
nozzles to the surface to be cleaned.
Robust surfaces
(for e.g. tiles, concrete,
stone)
Illustration
Set turning handle "power" to "HARD".
For the effective cleaning of hard-to-re-
move contamination.
Sensitive surfaces
(for e.g. wood)
Illustration
Set turning handle "power" to "SOFT".
For the gentle cleaning of sensitive sur-
faces.
Illustration
For normal surface cleaning, press the
foot pedal for surface cleaning.
A water stream will be emitted from the
two high-pressure nozzles in the rotor
arm.
Illustration
For edge and corner cleaning, press the
foot pedal for edge cleaning.
A water stream will be emitted from
green high-pressure nozzle.
Application
Cleaning floor surfaces
Tips for cleaning
Cleaning wall surfaces
Control elements
"Power" turning handle
Foot pedal for surface cleaning
Foot pedal for edge cleaning
8
EN