English
5
Fasten the T-Racer directly to the high-
pressure gun.
Illustration
1 Press the bayonet connection of the T-
Racer into the connection of the high-
pressure gun.
2 Turn it by 90° until it locks into place.
3 Tighten the safety cover.
Caution
Illustration
Always hold the T-Racer at the handle
while cleaning the walls.
High-pressure cleaner does not build up
the pressure or is vibrating
.
Dismantle the high-pressure nozzles,
check the high-pressure nozzles for
damage, rinse the T-Racer with clean
water then reinstall the high-pressure
nozzles.
Illustration
A Remove the clip.
B Pull out the high-pressure nozzle.
Rinse the high-pressure nozzle with
clean water, replace if necessary.
C Insert the nozzle.
D Re-insert the clip.
The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Please dispose your old appli-
ances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
You can use the extension pipes with any
other Kärcher accessory.
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
Use a moist cloth and clean the appliance
after use.
Cleaning wall surfaces
Troubleshooting
Cleaning the high-pressure nozzle
General information
Environmental protection
Tip
Spare parts
Warranty
Care
