Kärcher Ranger 12, Operating Instructions Manual

Page: 9 / 52

9
Operation
Open the flap (29) (Step A) in the lower part of the
shaft guide. This flap can be unlocked with the latch
(17) from inner side of the filter housing.
Guide the power cord through the upper part of the
shaft guide (16) as indicated by the dash-dot line
(Step B).
Loosely route the cable to the plug (27a) at the
bottom of the filter housing (Step C).
Then the upper (16) and lower part (17, already
assembled with compartment) of the shaft guide can
be locked together (Step D). The shaft has to be
secured to the bearing with two screws (7).
Plug-in appliance plug (27) first. Route cable as
shown from bottom to top using fixing points (28). All
remaining cable length will then move to the top auto-
matically.
Close cover (29) of cable inlet.
When not in use, cable can be rolled up between the
rotating cable hook (18) and the grip.
Filter compartment, front view.
Cover not shown.
18
16
A
D
B
29
7
27a
17
C
28
28
27
29
86452440 Manual Ranger 12 120V 60Hz