5
English
VACUUM AND POLISHING MACHINE PST 222
n
Important information
Check the mains connection cable at regular intervals.
The cable should only be replaced by an authorised Customer Service agent.
Do not brush over or vacuum any burning or smoldering objects.
Always pull the mains plug out of the socket before carrying out any maintenance
work or replacing the brushes.
Do not damage the mains connection cable.
Do not run over the mains connection cable.
The mains cable should only be replaced with an original spare part (see Technical
Specifications for order number).
Power supply
Only alternating current and the voltage indicated on the rating plate may be used to
operate this unit.
Guarantee
The terms of the guarantee that is applicable in each country have been published by
our respective national distributors. Any fault that occurs with your appliance during
the guarantee period will be repaired free of charge, provided that it has been caused
by a material or manufacturing defect.
Guarantee claims should be addressed to your dealer or the nearest authorized
customer service depot, and supported by documentary evidence of purchase.
n
Making the unit operational
Before using the unit, remove the securing device provided to protect the unit during
transport. Pull or carefully knock off the plastic strip on the underside of the unit.
Description of the unit
The unit is used for polishing parquet floors, linoleum, stone floors, etc.
The unit is supplied with three types of brushes:
1.
One set of brushes with hard bristles – white
2.
One set of brushes with soft bristles – black
3.
One set of felt discs
Attaching the handle
Push the two pipes and the handle together, ensuring that the spherical couplings have
locked into position correctly.
Push the lower pipe end (with hole) into the base body of the unit. The fitting position is
correct when the ribbing on the handle points forwards. Secure the connection by
pushing the screw through the hole and attaching the nut.
Attaching the dust bag
Push the nozzle situated on the underside of the dust bag into the designated
rectangular opening on the rear of the unit. The catch must be pointing upwards and
lock into position.
Then hook the spring to the top of the handle.
Inserting the filter bag
Unzip the fabric bag. Insert the filter bag and push the piece of cardboard with the
opening over the nozzle. Recheck the position of the filter bag and then zip up the
fabric bag.
Change the filter bag at regular intervals. This ensures that the unit will operate at full
power. (Order no. 6.904-128 – 3 ea.).
Summary of Contents for PST 222
Page 1: ...5 956 167 PST 222 ...
Page 2: ...2 1 EIN ON MARCHE ...