Kärcher PS 20, Manual

Page: 4 / 12

Please read and comply with
these original operating instruc-
tions prior to the initial operation and store
them for later use or subsequent owners.
The PS 20 is ideally suited for the high-
pressure cleaning of stairs and smooth
floor surfaces outside (e.g. wooden or
stone floors, clinker, tiles, concrete) as well
as of floor surfaces with a water discharge
inside (e.g. wash-room, garage).
This attachment has been designed for use
in private households and is not intended
for commercial use.
The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old accessories contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old appli-
ances. Please dispose of your old accesso-
ries using appropriate collection systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
 Please observe the safety instructions
of your high pressure cleaner.
 Only trigger the high-pressure jet at the
high-pressure gun if the PS 20 is locat-
ed on the surface to be cleaned.
 There must be no persons in the imme-
diate vicinity of the cleaning head.
 Beware of the recoil force! Ensure a
stable position and firmly hold on to the
high pressure gun with the extension
tube.
 Switch off the high-pressure cleaner
when you finish cleaning. If you are us-
ing the PS 20, then disconnect the
same from the high-pressure gun.
 Maximum water temperature 40 °C
(please observe the instructions of your
high-pressure cleaner).
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 2 - 3
Illustration
1 PS 20 Power Scrubber
2 Extension tube
General information
Proper use
Environmental protection
Safety instructions
Description of the Appliance
4 EN