English
5.906-498.0 Rev. 00 (09/09)
9
1
Indicator lamp
2
Rotary switch for suction output (min-max)
3
Micro switch
4
Instrument panel
5
Socket
Replace the control lamp, the socket, the micro switch and the
control dial if necessary
1
Fastening screws for turbine housing
2
Turbine circuit board
3
Turbine casing
4
Suction turbine
Pull the connection plug off the turbine.
Unscrew the fastening screws for the turbine casing.
1
Upper turbine seal
2
Power cord
3
Electrode cable, right
4
Suction turbine
5
Filter casing
6
Electrode cable, left
7
Insulating mat
8
Ground cable of the suction turbine
9
Turbine casing
Remove the turbine casing.
1
Medium turbine seal
2
Adapter plate
3
Filter casing
4
Ground cable of the suction turbine
5
Suction turbine
Unscrew the ground cable of the suction turbine.
Remove the medium turbine seal.
Remove the suction turbine.
Place the medium turbine seal onto the new suction turbine.
Note:
Make sure that the adapter plate is placed properly.
5.12 Replace the control lamp, the socket, the micro
switch and the control dial.
5.13 Replacing the suction turbine
2
1
3
5
4
2
1
1
4
3
2
5
3
6
7 8
9
4
1
2
3
4
5
1
