![background image](http://html1.mh-extra.com/html/karcher/nt-22-1-ap-bp/nt-22-1-ap-bp_manual_655048008.webp)
8
English
Note
Please read the operating instructions
of the battery pack manufacturer, es-
pecially the chapters on safety instruc-
tions!
Note
The battery pack is partially charged on
delivery. Charge before use and when
necessary.
Note
The battery pack can only be charged
when it is removed.
1. Open the battery cover.
2. Press the unlocking button and re-
move the battery pack.
3. Charge the battery pack according
to the operating instructions of the
charger manufacturer and the bat-
tery pack manufacturer.
Dry vacuuming
The appliance is fitted with a fleece
filter bag with lock latch, order no.
2.889-217.0 (5 pieces).
An additional fleece filter bag can be
used when vacuuming fine dust.
Installing the fleece filter bag
1. Unlock and remove the suction
head.
2. Fit the fleece filter bag.
Illustration C
3. Fit and lock the suction head.
Wet vacuum cleaning
Note
The flat fold filter (cellulose) with the or-
der number 6.904-156.0 included in
the scope of delivery is not recom-
mended for regular wet vacuum clean-
ing.
Installing the squeegees
1. Remove the brush strip.
Illustration D
2. Install the squeegees.
Note
The structured side of the squeegees
must face outwards.
Removing the fleece filter bag
The fleece filter bag must always be
removed when vacuuming wet sub-
stances.
1. Unlock and remove the suction
head.
2. Pull the fleece filter bag out to the
rear.
Illustration E
3. Fold in the lock latch and seal the
fleece filter bag tight.
4. Dispose of the used fleece filter bag
in accordance with statutory regula-
tions.
5. Fit and lock the suction head.
General
We recommend not using the
"Semi-automatic filter dedusting"
function button when vacuuming
wet dirt with the crevice nozzle or
upholstery nozzle (optional) when
sucking mainly water out of a con-
tainer.
The device switches off automatical-
ly when the maximum fluid level is
reached.
When vacuuming non-conductive
liquids (e.g. drill emulsion, oils and
grease) the device does not auto-
matically switch off when the con-
tainer is full. The filling level must be
continuously monitored and the con-
tainer emptied on a timely basis.
Downloaded from