8
English
Caution
Always work with an inserted
cartridge filter during wet as well
as dry vacuum cleaning!
Illustration
Remove the appliance head and
take accessories out of the contain-
er.
Illustration
Fit the swivel casters on the con-
tainer bottom.
Illustration
Put the appliance head onto the
container and lock it.
Illustration
Connect accessories.
Note:
For vacuuming dry dirt or water
off the floor - always work with the in-
sert (brush strip and rubber lip) in the
floor nozzle.
Illustration
Connect the mains plug and turn on
the appliance.
Caution
Work with a dry cartridge filter
only!
Check the filter for damage prior
to installation and replace as
necessary.
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
몇
Caution:
Do not use a filter bag!
Immediately switch the appliance off if
foam forms or liquids escape!
Immediately switch the appli-
ance off or pull the power plug if
foam forms or liquids escape!
Note:
If the container is full, a float
closes the suction opening, and the ap-
pliance works at a higher speed.
Switch off the appliance immediately,
and empty the container.
Illustration
Turn off the appliance and discon-
nect the mains plug.
Illustration
Remove the appliance head and
empty the reservoir.
Illustration
Stow away the mains cable and ac-
cessory at the machine. Store the
appliance in a dry room.
Commissioning and
operation
Attaching the Accessories
Dry vacuum cleaning
Wet vacuum cleaning
Finish operation
Empty the container
Storing the appliance