Kärcher MIC 45 classic Manual Download Page 17

     

15

The warranty terms published by our com-
petent sales company are applicable in 
each country. We will repair potential fail-
ures of your accessory within the warranty 
period free of charge, provided that such 
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the 
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.

Only use accessories and spare parts 
which have been approved by the man-
ufacturer. The exclusive use of original 
accessories and original spare parts 
ensures that the appliance can be oper-
ated safely and trouble free.

At the end of the operating instructions 
you will find a selected list of spare 
parts that are often required. 

For additional information about spare 
parts, please go to the Service section 
at www.kaercher.com. 

Drawing load of trailer hitch (option), unbraked

500

750

Permissible total drawing weight, braked

kg

3000

4300

Permissible total drawing weight, unbraked

kg

2200

4300

Turning radius

mm

2020

Capacity of fuel tank, diesel

l

43

Warranty

Spare parts

17

EN

Summary of Contents for MIC 45 classic




















Reviews: