![background image](http://html1.mh-extra.com/html/karcher/lb2000i/lb2000i_operating-instructions-manual_3652830012.webp)
12
Operations
Technical Specifications
NOTE: Always use a pad, which has been designed for electric ultra high speed burnishing of at least
2000 rpm.
The sound pressure level at the operator’s ear was measured to be 70 dBA. This was a nearfield, broad-band
measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source
of impact noise. The instantaneous sound pressure level is below 63 Pa.
ITEM
DIMENSION/CAPACITY
Construction
Heavy-duty die cast aluminum deck with heavy-duty rubber bumper,
tubular steel self adjusting handle with die cast aluminum handle
housing.
Motor
1.5 hp
Transmission
Direct drive from motor shaft.
Pad speed
2000 rpm
Electrical system:
LB2000I, LB2000IA
230 volts, 50Hz
LB2000, UB2000F
115 volts, 60Hz
Cable
75’ [22.9 m]
Switches
Dual levers with safety lock.
Pad Holder
Æ20” [50.8 cm] flexible disc
Wheels
Four Æ5” [Æ12.7 cm], 1.25” [3.2 cm] wide, non-marking tread.
Handle
Æ1.5” [Æ3.8 cm] tubular steel, self adjusting handle consistently
maintains full contact with the floor, and easy to use thumb activated
safety lock.
Dimensions (L x W x H)
32” [81.3 cm] X 23.9” [60.2 cm] X 48.4” [122.9 cm]
Pad size (See note)
20” diameter x 1” thick
86402450 Operators Manual - High Speed Burnisher (2000 Series)