17
Operations
Assembly Instructions
STEP 1:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. Move safety
latch into locked position to prevent
spray gun trigger from activating.
STEP 4:
Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
STEP 2:
Connect the high pressure
hose to the discharge fitting. Push
coupler collar forward until secure.
STEP 5:
Before installing nozzle,
turn on the water supply and run
machine allowing water to run from
the end of the wand until clear. Turn
off machine. Check for water leaks
and tighten as needed.
STEP 3:
Connect garden hose to
the cold water source.
STEP 6:
Pull the spring-loaded
collar of the wand coupler back to
insert pressure nozzle. Release the
coupler collar and push the nozzle
until the collar clicks. Pull the
nozzle to make sure it is seated
properly.
Safety
Switch
Spray
Gun
High Pressure
Hose
Landa VNG Operator’s Manual 8.913-939.0 - AB
Pump
Discharge
Fitting
High
Pressure
Hose
Cold
Water
Source
Garden
Hose
98015100-8
Pump
Water Inlet
Garden
Hose
Pressure
Nozzle
Wand
Coupler
Coupler
Collar
