Kärcher KM 130/300 R LPG, User Manual

Page: 9 / 19

-
7

Switch on the blower.

Set the programme switch to sweep
with sweeping brush when cleaning
surfaces.

Set the programme switch to sweep
with sweeping brush and side brush
when cleaning edges.

Switch off the blower.

Set the programme switch to sweep
with sweeping brush when cleaning
surfaces.

Set the programme switch to sweep
with sweeping brush and side brush
when cleaning edges.

Danger
Risk of injury! When emptying the waste
container, care should be taken to ensure
that no persons or animals are within its
swivelling range.

Danger
Danger of crushing. Never reach into the
rod assembly for the drainage mechanism.
Stay away from the area under the raised
container.

Danger
Danger of tipping. Place the machine on an
even surface during emptying.

Set programme selection switch to
"Transport drive".
.

Raise waste container.

Slowly drive towards the collection con-
tainer.

Lock parking brake.

Open the container door: Press the left
side of the switch and empty the waste
container.

Close the container door: Press the
right side of the switch (approximately 2
seconds), until the unit is tilted to the
end position.

Release parking brake.

Drive away the collection container
slowly.

Lower the waste container up to the
end-position.

Push the motor speed adjustment all
the way to the rear.

Press brake pedal and keep it de-
pressed.

Lock parking brake.

Turn ignition key to "0" and remove it.

Close gas drawing valve by turning it in
clock-wise direction.

Danger
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.

Turn ignition key to "0" and remove it.

Lock parking brake.

Secure the appliance at the lashing
points (4x) using tension belts, ropes or
chains.

Secure the wheels of the machine with
wheel chocks.

When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Danger
Risk of injury and damage! Note the weight
of the appliance in case of storage.
If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:

Park the sweeper on an even surface.

Raise the roller brush and the side-
brushes to prevent the bristles from be-
ing damaged.

Turn ignition key to "0" and remove it.

Lock parking brake.

Lock the sweeper to ensure that it does
not roll off.

Change engine oil.

Drain off the cooling water if frost is ex-
pected and check whether there is ade-
quate anti-frosting agent.

Clean the inside and outside of the
sweeper.

Charge the battery and clamp it off.

Close the gas inlet.

Unscrew the gas hose with union nut
(use 30 mm spanner).

Lock the gas bottle with the safety cap
and store upright in a suitable storage
area (also see Chapter "Safety instruc-
tions).
–
Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety
regulations.
–
Mobile appliances used for commercial
purposes are subject to safety inspec-
tions according to VDE 0701.

Park the sweeper on an even surface.

Turn ignition key to "0" and remove it.

Lock parking brake.
Caution
Risk of damage! Do not clean the appliance
with a water hose or high-pressure water
jet (danger of short circuits or other dam-
age).

Danger
Risk of injury! Wear dust mask and protec-
tive goggles.

Clean machine with a cloth.

Blow through machine with com-
pressed air.

Clean the machine with a damp cloth
which has been soaked in mild deter-
gent.
Note: Do not use aggressive cleaning
agents.
Sweeping dry floors
Sweeping damp or wet floors
Emptying waste container
Turn off the appliance
Close the gas inlet
Transport
Storage
Shutdown
Maintenance and care
General notes
Cleaning
Cleaning the inside of the machine
External cleaning of the appliance
9 EN