background image

7  

English

"

If detergent has been added: Suspend 
detergent suction hose in a container 
filled with clear water, switch the appli-
ance on for around 1 minute once the 
spray lance has been removed and rinse 
until water runs clear.

"

Release the lever on the handgun.

"

Switch the appliance switch to "0/OFF“.

"

Turn off tap.

"

Press the lever on the handgun to re-
lease any remaining pressure in the sys-
tem.

"

Disconnect the appliance from the water 
supply.

"

Detach spray lance from the handgun. 

"

Briefly switch the appliance on ("I/ON“), 
press the handgun lever until no further 
water is discharged (approx. 1 min).

"

Switch the appliance switch to "0/OFF“.

"

Use the safety catch to secure the hand-
gun lever.

"

Pull out the mains plug.

"

Store the power cord, the HP hose and 
the accessories on the appliance.

Caution

Please remove the detergent from the DT 
tank if the application is transported in a re-
clined position.

"

Fold up transport handle

"

Lock Transport handle

"

Unlock transport handle.

"

Retract transport handle.

"

Lift application at carrying handle.

Caution

Please remove the detergent from the DT 
tank if the application is transported in a re-
clined position.
Frost can destroy the not completely drained 

appliance. Store the appliance in a frost re-
sistant room during winter.

"

Store the coiled power cord above the 
accessories compartment.

"

Roll up HP hose and lock it with HP hose 
clip. Store HP hose in storage compart-
ment.

"

Insert hand gun and accessories into the 
appropriate compartment.

"

The washing brush (special accessory) 
can be stored in the pocket between both 
DT tanks.

Special accessories expand the possibilities 
of using your appliance. Please contact your 
Kärcher dealer for further information.

To ensure a trouble-free operation of the ap-
pliance and to match the individual cleaning 
task, we recommend our Kärcher detergent 
and maintenance agents. Please ask for our 
advice, or request information on the prod-
ucts.

Risk of injury

Always switch off the appliance and pull out 
the mains plug before care and maintenance 
work.

Prior to longer periods of storage, e.g. in the 
winter:

"

Remove filter from suction hose for de-
tergent and clean with running water.

"

Pull out filter in water connection using 
flat-nose pliers and clean with running 
water.

The appliance is maintenance-free.

Finish operation

Transport

Bearing wheel rolling

Carry appliance

Storing the Appliance

Special accessories

Detergents

Maintenance and Care

Cleaning

Maintenance

Summary of Contents for KB 5050













Reviews: