background image

English 5

Do not operate the product when 
fatigued or under the influence of 
alcohol or drugs.

Keep operating area clear of all 
persons.

Do not overreach or stand on 
unstable support. Keep good footing 
and balance at all times.

Follow the maintenance instructions 
specified in the manual.

This product is provided with a 
Ground Fault Circuit Interrupter built 
into the power cord plug. If replace-
ment of the plug or cord is needed, 
use only identical replacement parts.

Risk of Injection or Injury – Do Not 
Direct Discharge Stream At 
Persons.

High-pressure jets can be dangerous 
if misused. The jet must not be 
directed at persons, animals, 
electrical devices, or the unit itself.

Wear safety goggles and ear 
protection.

Risk Of Fire/Explosion – Do not 
spray flammable liquids.

Do not use acids, alkaline, solvents, 
or any flammable material in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the machine.

Risk of Electrocution

Inspect cord before using - Do not 
use if cord is damaged.

Keep all connections dry and off the 
ground.

Do not touch plug with wet hands.

Do not use extension cord with this 
product.

Connect to individual branch circuit 
only.

This unit has been designed for use 
with cleaning detergents 
recommended by the manufacturer. 
The use of other cleaning deter-
gents may affect the operation of 
the machine and void the warranty.

Gun kicks back – Hold with both 
hands.

The trigger gun safety lock prevents 
the trigger from accidentally being 
engaged.   This safety feature must 
be engaged when replacing nozzles 
or not in use.

This safety feature DOES NOT lock 
spray in the ON position.

Do not spray electrical connections, 
electrical outlets or fixtures.

Do not use with flammable liquids 
and toxic chemicals.

High-pressure. Keep clear of nozzle.

Injection hazard: Equipment can 
cause serious injury if the spray 
penetrates the skin. Do not point the 
gun at anyone or any part of the 
body. In case of penetration seek 
medical aid immediately.

This system is capable of producing 
1900 psi.  To avoid rupture and injury, 
do not operate this pump with 

Summary of Contents for K1900




















Reviews: