background image

6

5

WORKING WITH DETERGENT

For best results see Cleaning
Tips on pages 8 & 9 for specific
information on how to clean 
different surfaces.

Always Use Karcher 
Detergents for Best Results.

Karcher biodegradable detergents are
specially formulated to protect the environ-
ment and your pressure washer. Special 
formula won’t clog the suction tube filter 
and will protect the internal parts of the
pressure washer for a longer life. For
Karcher Detergents, check your retailer 
or call:

1-800-537-4129

The following Karcher detergents are
available:

• Vehicle Wash

• House Wash

• Degreaser

• Deck Wash

• All Purpose Cleaner

Step 1

To apply detergents the triple jet

nozzle must be set to the “CHEM” position.

Step 2

Fill a container with Karcher

detergent. Place the filter end of detergent
suction tube into the container.

Step 3

With the engine running, pull 

trigger to operate unit: Liquid detergent is
drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.

Caution

Never use:

• Bleach, Chlorine products and other 

corrosive chemicals

• Liquids containing solvents 

(i.e., paint thinners, gasoline, oils)

• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.

Detergents can only be applied in the “CHEM” setting.

USING THE ACCESSORIES

The triple jet nozzle must be positioned to one of the two settings for high pressure cleaning
by turning the nozzle tip. The pencil jet spray (0º) should be used for stubborn dirt. The High
pressure flat spray (25º) should be used for cleaning over a large surface area. The third set-
ting on the triple jet nozzle is used for the application of detergents.

OPERATING INSTRUCTIONS 

- continued

Step 9

Adjust pressure control to

desired setting.

Step 8

Pull the starter handle. If the

engine fails to start after 3 pulls squeeze the
trigger gun to release pressure, and repeat
step 8. 

WARNING TO AVOID SERIOUS INJURY, NEVER POINT SPRAY NOZZLE AT
YOURSELF, OTHER PERSONS OR ANIMALS

High pressure 
pencil jet cleaning.

High pressure 
fan spray cleaning.

Low Pressure detergent
application “CHEM” position.

K8000G Manual  11/30/01  5:06 PM  Page 6

Summary of Contents for K 8000 G








Reviews: