6
There are the switch positions "1/ON" and
"eco" to switch the appliance on.
Note:
The switch position "eco" allows the
control of pressure and leads to water and
energy savings of approx. 20% by using the
spray lance.
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 13-14
Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Illustration
Insert the top holder and push down all
the way.
Option
Illustration
Install the top storage hook.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Illustration
Wind up the high-pressure hose on the
hose drum.
Illustration
Slide the free end of the coiled high
pressure hose through the recesses on
the dosage regulator.
Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
Illustration
Press the connecting fitting from the
short high pressure hose into the brass
intake until it locks into place audibly.
Check the secure connection by pulling
on the high pressure hose.
Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note:
Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Operation
Switch position "eco"
Recommended application ranges for
switch position "eco"
Before Startup
Install the storage for trigger gun
Install the storage hook for the mains
connection cable
Install the dosage regulator for
detergent
Install the transport handle
Connect the high pressure hose to the
trigger gun
