background image

English

 17

Caution

Never operate the high-pressure cleaner 
when the tap is turned off as dry running will 
damage the high-pressure pump.

!

Connect the high pressure hose to the 
high pressure connection of the appli-
ance.

!

Push the spray lance into the trigger 
gun and fasten it by turning it through 
90°.

!

Completely open the water tap.

!

Insert the mains plug into the socket. 

!

Turn on the appliance “I/ON”.

n

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Illustration 

!

Unlock the lever on the trigger gun.

!

Pull on the lever of the trigger gun; the 
device will switch on.

Note:

 Release the lever of the trigger gun; 

the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning 
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".

!

Release the lever on the trigger gun. 

!

Turn the spray lance to the desired po-
sition.

For strong contaminations.
Not suitable for use with detergents.

Suitable for use with detergents.

We recommend the Kärcher cleaning and 
care program that will match the respective 
cleaning requirements. Please seek con-
sultation or request information on the sub-
ject.

!

Use spray lance with pressure regula-
tion (Vario Power).

!

Turn the spray lance to "Mix" position.

!

Fill the detergent solution in the deter-
gent tank (observe dosage instructions 
on the packaging of the detergent).

!

Adjust the suction volume of the deter-
gent solution by means of the dosage 
regulator for detergents.
Turning the regulator to the left: Addi-
tional dosage from the left detergent 
tank.
Turning regulator to the right: Additional 
dosage from the right detergent tank.

!

Spray the detergent sparingly on the 
dry surface and allow it to react, but not 
to dry.

!

Spray off loosened dirt with the high-
pressure ray.

!

Release the lever on the trigger gun.

Illustration 

!

Lock the lever on the trigger gun.

!

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the "0/OFF" switch.

!

Insert the trigger gun in its holder.

Start up

Operation

Spray lance with pressure regulation

Spray lance with dirt blaster

Washing brush

Working with detergent

Recommended cleaning method

Interrupting operation

Summary of Contents for K 7.85 M













Reviews: