background image

English

DANGER

The appliance may not be op-

erated in explosive atmos-

pheres.

Never use the appliance to 

clean objects containing haz-

ardous substances (e.g. as-

bestos).

Do not spray flammable liq-

uids.

Never draw in fluids contain-

ing solvents or undiluted ac-

ids and solvents! This in-

cludes petrol, paint thinner 

and heating oil. The spray 

mist is highly inflammable, 

explosive and poisonous. Do 

not use acetone, undiluted 

acids and solvents, as they 

corrode the materials used on 

the appliance.

Keep packaging films away 

from children, there is a risk of 

suffocation!

WARNING

According to applicable regu-

lations, the appliance must 

never be used on the drinking 

water net without a system 

separator. Ensure that the 

connection of your building 

water installation on which 

the high-pressure cleaner is 

operated is equipped with a 

system separator pursuant to 

EN 12729 Type BA.

Water that has flown through 

a system separator is no 

longer classified as drinking 

water.

High-pressure hoses, fixtures 

and couplings are important 

for the safety of the appli-

ance. Only use high-pressure 

hoses, fixtures and couplings 

recommended by the manu-

facturer.

When disconnecting the sup-

ply or high pressure hose, hot 

water may leak from the con-

nections after operation. 

CAUTION

Mind the weight of the appli-

ance when selecting the stor-

age location and during trans-

port (see technical data) to 

prevent accidents or injuries.

WARNING

This appliance was designed 

to be used with detergents 

which are supplied or recom-

mended by the manufacturer. 

The use of other detergents 

or chemicals may compro-

mise the safety of the appli-

ance.

The improper use of deter-

gents can cause severe inju-

ries or toxication.

Store detergents away from 

the reach of children. 

Other risks

Working with detergent

Summary of Contents for K 6 Premium

















Reviews: