background image

English

 7

To ensure a trouble-free operation of the 
appliance and to match the individual 
cleaning task, we recommend our Kärcher 
detergent and maintenance agents. Please 
ask for our advice, or request information 
on the products.

Î

Release the lever on the trigger gun.

Î

During breaks, use the safety catch to 
secure the trigger gun lever.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using 
the ON/OFF switch.

Î

If detergent has been added: 
Fill detergent tank with clear water, 
switch the appliance on for approxi-
mately one minute once the spray lance 
has been removed and rinse until water 
runs clear.

Î

Release the lever on the trigger gun.

Î

Set the appliance switch to "0/OFF“.

Î

Turn off tap.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Î

Disconnect the appliance from the wa-
ter supply.

Î

Detach spray lance from the trigger gun

Î

Switch the appliance on ("I/ON“), press 
the trigger gun lever until no further wa-
ter is discharged (approx. 1 min).

Î

Set the appliance switch to "0/OFF“.

Î

Use the safety catch to secure the trig-
ger gun lever.

Î

Pull out the mains plug.

Î

Store the power cord, the high pressure 
hose and the accessories on the appli-
ance.

Risk of electric shock

Always switch off the appliance and pull out 
the mains plug before care and mainte-
nance work.

Prior to longer periods of storage, e.g. in 
the winter:

Î

Pull out the fine filter in water connec-
tion using flat-nose pliers and clean with 
running water.

Î

Remove filter from suction hose for de-
tergent and clean with running water.

The appliance is maintenance-free.

Risk of frost

Protect the appliance and accessories 
against frost. 

The appliance and its accessories can get 
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to 
them:

Î

Store the appliance and the entire ac-
cessories in a frost-safe room.

Only use original Kärcher spare parts. You 
will find a list of spare parts at the end of this 
document.

Detergents

Interrupting operation

Finish operation

Maintenance and care

Cleaning

Maintenance

Frost protection

Spare Parts

Summary of Contents for K 6.91 MD













Reviews: