Kärcher K 5 Compact, Original Instructions Manual

Page: 10 / 40

– 9
For connection values, see type plate/tech-
nical data.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Observe regulations of water supplier.
몇
WARNING
According to applicable regulations, the ap-
pliance must never be used on the drinking
water net without a system separator. A
suitable system separator by KÄRCHER or
alternatively a system separator according
to EN 12729 type BA must be used.
Water that has flown through a system sep-
arator is no longer classified as drinking
water.
ATTENTION
Always connect the system separator to
the water supply, never directly to the appli-
ance!
This high-pressure cleaner is suited to work
with the KÄRCHER suction hose with back-
flow valve (Optional accessory, order no.
4.440-238) to draw in surface water, e.g.
from water butts or ponds (see specifica-
tions for max. suction height).

Fill the suction hose with water.

Screw the suction hose into the water
connection of the appliance and insert it
into the water source (e.g. rainwater
drum).
ATTENTION
Dry running of more than 2 minutes leads to
damage of the high-pressure pump. If the
appliance does not build up pressure within
2 minutes, switch the appliance off and pro-
ceed in accordance with the instructions in
Chapter "Troubleshooting".
Illustration

Push the high pressure hose into the
quick coupling until it locks audibly.

Attach the water supply hose to the
coupling on the water connection.
Note: The supply hose is not included.

Connect the water supply hose to the
water supply.

Completely open the water tap.

Insert the mains plug into the socket.

Turn on the appliance “I/ON”.
Illustration

Unlock the lever on the trigger gun.

Pull on the lever of the trigger gun; the
device will switch on.
Switch the appliance on for a (max. of 2
minutes) and wait until the water exits at
the hand spray gun without bubbles.

Release the lever on the trigger gun.
Note: Release the lever of the trigger
gun; the device will switch off again.
High pressure remains in the system.
Illustration

Lock the lever on the trigger gun.
몇
DANGER
The water jet that is emitted from the high-
pressure nozzle results in a repulsion pow-
er acting on the hand spray gun. Make sure
that you have a firm footing and are also
holding the hand spray gun and spray lance
firmly.
몇
DANGER
High-pressure jets can be dangerous if im-
properly used. The jet may not be directed
at persons, animals, live electrical equip-
ment or at the appliance itself.
ATTENTION
Risk of damage! The appliance must
only be operated laying down (horizon-
tal).
ATTENTION
Car tyres, paint or sensitive surfaces such
as wood should not be cleaned with the dirt
blaster, as there is a risk of damage.
Water supply
Water supply from mains
Drawing in water from open reservoirs
Start up
Operation
9 EN