background image

English

 5

of electrocution. Check with a qualified 
electrician or service personnel if you 
are in doubt as to whether the outlet is 
properly grounded. Do not modify the 
plug provided with the product - if it will 
not fit the outlet, have a proper outlet in-
stalled by a qualified electrician. Do not 
use any type of adapter with this pro-
duct.

!

Use only 3-wire extention cords that 
have 3-prong grounding-type plugs 
and 3-pole cord connectors that ac-
cept the plug from the product.
Up to 25 ft = 12/3 AWG; 
25 to 50 ft = 10/3 AWG.

!

Use only extension cords that are in-
tended for outdoor use. These ex-
tension cords are identified by the 
marking “Acceptable for use with 
outdoor appliances; store indoors 
while not in use.”

!

Use only extension cords having an 
electrical rating not less than the ra-
ting of the product.

!

Do not use damaged extension 
cords.

!

Examine extension cord before 
using and replace if damaged.

!

Do not abuse extension cord and do 
not yank on any cord to disconnect.

!

Keep cord away from heat and sharp 
edges.

!

Always disconnect the extension 
cord from the receptacle before dis-
connecting the product from the ex-
tension cord. 

!

 If you are using an extension cord, it 
should always be completely un-
wound from the cable drum.

WARNING

To reduce the risc of electrocution, keep 
all connections dry and off the ground. 
Do not touch plug with wet hands.

CAUTION

Dirt in the feed water will damage the 
unit. To avoid this risk, we recommend 
fitting a water filter.

!

Water hose must be at least 1/2 inch 
or 5/8 inch in diameter.

!

Flow rate of water supply must not 
fall below 2 GPM (gallons per minu-
te).

!

Flow rate can be determined by run-
ning the water for one minute into an 
empty 5-gallon container.

!

The water supply temperature must 
not exceed 104°F/40°C.

!

Never use the pressure washer to 
draw in water contaminated with sol-
vents, e.g. paint thinners, gasoline, 
oil, etc.

!

Always prevent debris from being 
drawn into the unit by using a clean 
water source.

SAVE THESE 

INSTRUCTIONS !

Extension Cords

WATER SUPPLY (Cold Water Only)

Summary of Contents for K 5.93

















Reviews: