![background image](http://html1.mh-extra.com/html/karcher/k-4-promo/k-4-promo_manual_4253774010.webp)
– 5
The scope of delivery of your appliance is illustrated on
the packaging. Check the contents of the appliance for
completeness when unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.
Illustrations on Page 2
1
High pressure connection
2
Appliance switch „0/OFF“ / „I/ON“
3
Storage for trigger gun
4
Transport handle
5
Detergent suction hose with detergent filter and lid
6
Detergent Tank
7
Storage for high pressure hose
8
Water connection with integrated sieve
9
Coupling element for water connection
10 Hooks for fastening the net
11 Accessory net
12 Mains cable with mains plug
13 Bearing wheel
14 Trigger gun
15 Lock trigger gun
16 Button for detaching the high-pressure hose from
the trigger gun
17 High pressure hose
18 Spray lance with pressure regulation (Vario Power)
Carrying out the most common cleaning tasks.
The working pressure can be continuously in-
creased from "SOFT" to "HARD". To adjust the
working pressure, release the trigger gun lever and
turn the spray lance to the desired position.
Suitable for use with detergents.
19 Spray lance with Dirtblaster
For strong contaminations.
20 Washing brush
Suitable for use with detergents.
21 Foam nozzle
For effective detergent foam.
22 Detergent
Mount loose parts delivered with appliance prior to start-
up.
Illustrations on Page 3
Illustration
Slide the transport handle into the guide and se-
cure it with 2 screws.
Illustration
Insert holder for trigger gun.
Illustration
Lock the detergent tank in place on the appliance.
Illustration
Close the detergent tank with the lid.
Connect the suction hose for detergent to the con-
nection.
Illustration
Screw the coupling element to the water connec-
tion on the appliance.
Illustration
Hook the accessories net into the hooks shown in
the illustration.
Illustration
Push the high pressure hose into the trigger gun
until it locks audibly.
Note:
Make sure the connection nipple is aligned
correctly.
Check the secure connection by pulling on the high
pressure hose.
Park the appliance on an even surface.
Illustration
Connect the high pressure hose to the high pres-
sure connection of the appliance.
Insert the mains plug into the socket.
For connection values, see type plate/technical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the KÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Illustration
Attach the water supply hose to the coupling on the
water connection.
Connect the water supply hose to the water supply.
Completely open the water tap.
Note:
The high-pressure cleaner is not suitable for tak-
ing up water from alternative water sources.
Description of the Appliance
** Additionally required
23 Fabric-reinforced water hose with commercially
available coupling.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Start up
Water supply from mains
10
EN