background image

English

There are the switch positions "1/ON" and 
"eco" to switch the appliance on.

Note:

 The switch position "eco" allows the 

control of pressure and leads to water and 
energy savings of approx. 20% by using the 
spray lance.

Mount loose parts delivered with appliance 
prior to start-up.

Illustrations on Page 13-14

Illustration 

Push the wheels into the intake.

Secure the wheels using the included 
plug. Align the plug properly!

Illustration 

Place the bottom holder into the recess-
es and push forward until it audibly 
locks in.

Insert the top holder and push down all 
the way.

Illustration 

Press in the storage hook and lock it 
into the top position.

Illustration 
You will need the 2 included screws as well 
as a Phillips screwdriver PH 2.

Slide the transport handle into the guide 
and secure it with 2 screws.

Illustration 
You will need the 2 included screws as well 
as a Phillips screwdriver PH 2.

Insert both detergent hoses onto the 
hose fittings.

Install the dosage regulator and con-
nect using 2 screws.

Note

: During installation you must make 

sure that the tongues of the dosage regula-
tor match up with the intended recesses in 
the casing.

Illustration 

Slide the free end of the coiled high 
pressure hose through the recesses on 
the dosage regulator.

Insert the hose drum into the intakes on 
the transport handle.

Insert the axle of the hand crank into the 
guides.

Install the fixating plate and secure it 
using 2 screws.

Press the connecting fitting from the 
short high pressure hose into the brass 
intake, secure with clamps.

Note:

 Make sure the connection nipple is 

aligned correctly.

Illustration 

Push the high pressure hose into the 
trigger gun until it locks audibly.

Note:

 Make sure the connection nipple is 

aligned correctly.

Check the secure connection by pulling 
on the high pressure hose.

Operation

Switch position "eco"

Recommended application ranges for 
switch position "eco"

Before Startup

Install wheels

Install the storage for trigger gun

Install the storage hook for the mains 
connection cable

Install the transport handle

Install the dosage regulator for 
detergent

Install the high pressure hose drum

Connect the high pressure hose to the 
trigger gun

Summary of Contents for K 4 Premium eco!ogic

















Reviews: