Kärcher K 4 Plus, Instructions Manual

Page: 9 / 20

English 9
Illustrations on Page 3, 4
Mount loose parts delivered with appliance
prior to start-up.
Illustration
 Push the wheels into the intake.
 Secure the wheels using the included
plug. Align the plug properly!
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Insert the top holder and push down all
the way.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Before assembling the handle you need
to place the long tube of the detergent
regulator between handle and machine
body.
 Slide the transport handle into the guide
and secure it with 2 screws.
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Insert detergent suction tube onto the
tube fitting.
 Install the dosage regulator and con-
nect using 2 screws.
Note : During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
 Park the appliance on an even surface.
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Illustration
 Push the high pressure hose into the
quick coupling until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
 Check the secure connection by pulling
on the high pressure hose.
 Insert the mains plug into the socket.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
Assembly
Install wheels
Install the storage for trigger gun
Install the transport handle
Install the dosage regulator for
detergent
Start up
Water supply from mains