background image

English

Notes about the ingredients (REACH)

You will find current information about the 
ingredients at: 

www.kaercher.com/REACH

Mount loose parts delivered with appliance 
prior to start-up.

Illustrations on Page 15

Illustration 

Place the bottom holder into the recess-
es and push forward until it audibly 
locks in.

Insert the top holder and push down all 
the way.

You will need the 2 included screws as well 
as a Phillips screwdriver PH 2.
Illustration 

Slide the transport handle into the guide 
and secure it with 2 screws.

You will need the 2 included screws as well 
as a Phillips screwdriver PH 2.
Illustration 

Insert both detergent hoses onto the 
hose fittings.

Illustration 

Install the dosage regulator and con-
nect using 2 screws.

Note

: During installation you must 

make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.

Environmental protection

The packaging material can be recy-
cled. Please arrange for the environ-
mentally appropriate disposal of the 
packaging.
Old appliances contain valuable recy-
clable materials that should be recy-
cled properly. Please arrange for the 
environmentally appropriate disposal 
of the old devices.
Electrical and electronic devices often 
contain components which could po-
tentially pose a danger to human 
health and the environment if handled 
or disposed of incorrectly. However, 
these components are necessary for 
the proper operation of the device. De-
vices marked with this symbol must not 
be disposed of with regular household 
rubbish.
Cleaning operations which produce 
oily waste water, e.g. engine washes, 
underbody washes, may only be car-
ried out using washing stations 
equipped with an oil separator.
Work with detergents must only be per-
formed on liquid-tight work surfaces 
with a connection to the sewer system. 
Do not let release detergent into wa-
ters or earth.
The extraction of water from public wa-
ters is prohibited in some countries.

Assembly

Install the storage for trigger gun

Install the transport handle

Install the dosage regulator for 

detergent

Summary of Contents for K 4 Classic

















Reviews: