11
4.1 High Pressure Operation
• Ensure the Spray Lance with Vario Power Nozzle
(No. 6a) or the Dirt Blaster (No. 6b) are attached se-
curely to the Spray Gun (No. 8).
• Set vario power nozzle to high pressure mode "+".
• Aim the lance towards the object to be cleaned making sure the re-
commended working distance is used for reference (See Page 9). Re-
lease the safety ratchet on the Spray Gun and squeeze the trigger.
• Switch on the pressure washer (No. 2)
The pressurised water jet alone is capable of fulfilling most
cleaning tasks around the garden or on building work but
detergent and wash brush are advantageous when cleaning
vehicles or other paint finishes.
4.2 Low Pressure Operation with Detergent (chemicals)
• Dilute the detergent in a suitable container to the required concentrati-
on before using. (The correct dilution is dependent on the degree of
soiling of surface and is best determined by experience).
• Hang the Detergent Suction Tube (No. 1) in the Detergent Container.
• Set Vario Power Nozzle to low pressure mode "–".
Note: No detergent in high pressure mode
• Aim the Spray Gun towards the object to be cleaned,
release the Safety Ratchet on the Spray Gun and squeeze the trigger
to apply the detergent to the working area.
• Switch on the pressure washer (No. 2)
We recommend the following cleaning method:
Step 1:
Remove loose dirt by washing over the surface to be cleaned with the
high pressure jet.
Step 2:
Spray on the detergent and leave for 1-4 minutes, so assisting the easy
removal of fine dirt and associated greasy adhesions.
Step 3:
Finally, spray off the loosened dirt with the high pressure spray.
Summary of Contents for K 4.94 M
Page 19: ...19 10 ASSEMBLY...
