![background image](http://html1.mh-extra.com/html/karcher/k-4-130/k-4-130_operating-instructions-manual_4244040005.webp)
English
5
When unpacking the product, make sure that no
accessories are missing and that none of the
package contents have been damaged. If you
detect any transport damages please contact
your dealer.
Illustrations on Page 2
1
Water connection
2
Coupling element for water connection
3
High pressure connection
4
Appliance switch "0/OFF“/ „I/ON“
5
Detergent Tank
6
Storage for trigger gun
7
Transport handle
8
Suction hose for detergent
9
Storage for accessories
10 Mains cable with mains plug
11 Lock trigger gun
12 Trigger gun
13 High pressure hose
14 Spray lance with pressure regulation (Vario
Power)
15 Spray lance with Dirtblaster
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Illustration
Mount loose parts delivered with appliance prior
to start-up.
Illustration
Î
Push the high pressure hose into the trigger
gun until it locks audibly.
Note:
Make sure the connection nipple is
aligned correctly.
Î
Check the secure connection by pulling on
the high-pressure hose.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply with-
out a system separator. Use a suitable
system separator manufactured by KÄRCHER;
or, as an alternative, a system separator as per
EN 12729 Type BA. Water flowing through a sys-
tem separator is considered non-drinkable.
Note:
Impurities in the water can damage the
high-pressure pump and accessories. For pro-
tection, the use of the KÄRCHER water filter (op-
tional accessory, order no. 4.730-059) is
recommended.
Observe regulations of water supplier.
For connection values, see type plate/technical
data.
Î
Use a fibre-reinforced water hose (not in-
cluded) with a standard coupling. (Minimum
diameter 1/2 inch (13 mm), minimum length
7.5 m).
Î
Screw the coupling unit (supplied) to the wa-
ter connection on the appliance.
Î
Push the water supply hose onto the cou-
pling unit, then connect it to the water supply.
This high-pressure cleaner is suited to work with
the KÄRCHER suction hose with backflow valve
(Optional accessory, order no. 4.440-238) to
draw in surface water, e.g. from water butts or
ponds (see specifications for max. suction
height).
Î
Fill the KÄRCHER suction hose with back-
flow valve with water, screw to water supply
and hang into he water butt.
Î
Separate the high pressure hose from the
high pressure connection of the appliance.
Operation
Description of the Appliance
Special accessories
Before Startup
Water supply
Water supply from mains
Drawing in water from open reservoirs