background image

2

IMPORTANT PRECAUTIONS – 

Read First!

Safety Warnings

When using this product, basic precau-
tions should always be followed:

• Read all the instructions before using 

the product.

• High pressure jets can be dangerous 

if subject to misuse. The jet must not 
be directed at persons, animals,
electrical devices, or the machine itself.

• To reduce the risk of injury, do not

operate the machine near children.

• Learn how to stop the machine and 

release pressure quickly. Be thoroughly
familiar with the controls.

• Stay alert — watch what you are doing.

• Wear safety goggles.

• Do not use acids,

solvents, or any
flammable material in this product.
These products can cause physical
injuries to the operator and irreversible
damage to the machine.

• Do not operate the product when 

fatigued or under the influence of 
alcohol or drugs.

• Do not stand on unstable surfaces.

Stand with both feet balanced at all
times.

• To reduce the risk of electrocution, keep

all connections dry and off the ground.
Do not touch plug with wet hands.

• The Gun Safety Lock PREVENTS 

the trigger from accidentally being
engaged. This safety feature DOES
NOT lock trigger in the on position.

Extension Cords

Use a sufficient gauge: Up to 25 ft = 12/2
AWG; 25 to 50 ft = 10/2 AWG. Use only
extension cords that are intended for
outdoor use. These extension cords are
identified by the marking “Acceptable for
use with outdoor appliances; store
indoors while not in use.” Use only
extension cords having an electrical rating
not less than the rating of the product. Do
not use damaged extension cords.
Examine extension cord before using and
replace if damaged. Do not abuse
extension cord and do not yank on any
cord to disconnect. Keep cord away from

heat and sharp edges. Always disconnect
the extension cord from the receptacle
before disconnecting the product from the
extension cord. If you are using an
extension cord, it should always be
completely unwound from the cable drum. 

This Product Is 
Double Insulated

In a double-insulated product, two
systems of insulation are provided instead
of grounding. No grounding method is
provided on a double-insulated product,
nor should a method for grounding be
added to the product. Servicing a double-
insulated product requires extreme care
and knowledge of the system, and should
be done only by qualified service
personnel. Replacement parts for a
double-insulated product must be
identical to the parts they replace. 

A double-insulated product is marked
with the words, “DOUBLE INSULATED.” 

Caution

•  Follow the maintenance instruc-

tions specified in the manual.

• This machine has been designed

for use with cleaning detergents
supplied or recommended by the
manufacturer. The use of other
cleaning detergents may affect
the operation of the machine and
void the warranty.

Summary of Contents for K 360 M

























Reviews: