background image

1 800-537-4129   pa

g

e 6    

WORKING WITH DETERGENTS

Karcher Pressure washers operate at two pressures. The high pressure is used for cleaning,
you cannot apply detergents when working at high pressure. To apply detergents you must be
operating at low pressure.

Caution

Never use:

• Bleach, Chlorine products and other 
corrosive chemicals
• Liquids containing solvents 

(i.e., paint thinners, gasoline, oils)

• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.

Step 2

Fill a container with Karcher

detergent. Place the filter end of detergent
suction tube into the container.

Step 3

Turn on the pressure washer.

Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.

The following Karcher detergents are 
available:

• Vehicle Wash

• House Wash

• Degreaser

• Deck Wash

• All Purpose Cleaner

In USA Call:

1-800-537-4129

or visit our website:

www.karcher-usa.com

For best results see Cleaning Tips
on pages 8 & 9 for specific 
information on how to clean 
different surfaces.

Always Use Karcher 
Detergents for Best Results.

Karcher biodegradable detergents are
specially formulated to protect the environ-
ment and your pressure washer. Special 
formula won’t clog the suction tube filter 
and will protect the internal parts of the
pressure washer for a longer life. For
Karcher Detergents, check your retailer 
or call:

Step 1

Install the Wash brush or the Vario

spray wand. Set the Vario spray wand to the
low pressure setting (-) by turning the wand
collar. The wand must be set in the low pres-
sure (-) position to apply detergents.

Summary of Contents for K 280 M













Reviews: